SolarproTM is a quality reinforced hot house fabric.
SolarproTM is our Polyshield Natural or White, made from transparent H.D.P.E with woven scrim. SolarproTM is heavily U.V. stabilised and has a 5 year UV warranty.
Please note: Solarpro is designed as a general purpose cover for agricultural and horticultural purposes. This product is not suitable for applications where excessive flexing or ‘wind flap’ is present.
Base Fabric: Woven High Density Polyethylene Scrim
Double Lamination using Low Density
UV Stabilisation: Chimassorb 2020 from BASF in the tapes and coating
Light Transmission: Natural 85.6% – White 50.0%
Refractivity Index Natural: 1.51
Thermal Resistance Natural: 0.0188 m2k/w
Thermal Conductivity Natural: 0.016 w/mk
Construction of base fabric: 10 x 10-1000D-HDPE
Lamination: 2 x 45 microns-LDPE
Tolerance: 10% in weight and properties
Solarpro is made to comply with and exceed AU standards AS4174.1994.
See more information on Solarpro
|Bursting Force (Mean)||1224N|
Please note: all the above values are typical values taken from independent test results and are not to be taken as a minimum specification. Typically variations of +/-10% are to be expected. Due to our continual product development process, product profiles are subject to change at any time without notice.
This product is designed as a general purpose cover for agricultural and horticultural purposes. This product is not suitable for applications where excessive flexing or ‘wind flap’ is present.
The product specifications represent the results sourced from third party testing authorities, and tolerances may vary by as much as +/- 10%
Due to our continual product development process, product profiles are subject to change at any time without notice. The manufacture reserves the right to alter or modify the product specifications without notice, and assumes no obligation or liability for the suitability and use of its products other than the applications intended by the manufacture.
Ultra Violet (UV) Warranty
Solarpro TM UV warranty covers any * abnormal deterioration resulting from Ultra Violet exposure for a period of five years (5)
If proven that the fabric has deteriorated more than the specified value during the 5 year warranty term, Polyfab Australia will completely at their discretion supply replacement material(same or of equivalent specifications), or contribute to the cost of alternative fabric on the following pro-rata basis:
- The first full year of exposure 75%
- After 2 years of exposure 50%
This warranty does not cover deterioration caused by exposure to pollution, chemicals, solvents, cleaning agents or other substances that may be harmful to the performance of the UV stabilizers
- Abnormal Deterioration means deterioration exceeding 25% of the fabrics original tensile strength each concurrent year from UV exposure.
The above information represents the results sourced from third party testing authorities, and tolerances may vary as much as 10%.