PolyFX - polyfab

PolyFX is a light-weight, knitted shade cloth that provides the perfect option for residential settings like backyard swimming pools and barbeque areas where protection against the heat and sun is paramount.

Weight: 230gsm
Dimensions: 3.8m x 30m

PolyFX can be used around beach entertainment and barbecue facilities, outdoor leisure and picnic areas. Other applications include playgrounds, kindergartens, secondary schools, camping grounds, hotels, motels and holiday resorts. The fabric is heat set, making it easy to use as it lays flat and there is no curling or rolling up when marked out, cut or sewn.

 

Suitability for end use is determined by end user.

Porcelain

Paperbark

Cappuccino

Sandstone

Café Noir

Copper

Manor Red

Midnight Green

Blue Gum

Platinum

Woodland Grey

Monument

Black

Slate

Navy Blue

Aquamarine

Red

Orange

Lemon

Lime

Grape

White

Please note that onscreen colour may not match actual material colour exactly.

Our Gallery

Scroll through our gallery of Polyfx® images and videos to see more applications.

Features and Benefits

  • Light weight but very strong.
  • Excellent strength to weight ratio
  • Excellent UV protection
  • Easy to take down over winter and reinstall for summer
  • 3.8m width for less seams

 

Shade Fabric Summary AS4174: 2018

Easy to Use

PolyFX has been heat set, making it more stable and easier to cut and sew when fabricating a shade sail. It also has less shrinkage while still retaining its strength and very high UV protection.

PolyFX Technical Specifications

BRAND POLYFX
Construction Monofilament and tape
Weight 230gsm
Width 3.8m
Roll Length 30m
Roll Diameter 26cm
Roll Weight 26kg
Freight Cubic 0.13m3
Breaking Force Warp / Weft 570 / 1850 N
Tear Resistance Warp / Weft 100 / 160 N/50mm
Bursting Pressure 2600 kPa
Bursting Force 1300 N
UVR Block 91.3 to 96.7%
Shade Protection AS4174 : 2018 Effective – Most Effective
Flammability Index AS 1530.2 (Range 0 low, 100 high) 9
Spread of Flame Index AS 1530.3 8
Smoke Developed Index AS 1530.3 (Range 0 low, 10 high) 5
Limited  UV Warranty 12 years

Further specifications are available on the Technical Support page. Click here.

FR Results

AS/NZS 1530.2 and 1530.3 available on request.

PolyFX 12 Year Limited UV Warranty

Shadecloth for Human Protection

The Nolan Group warrants that the Polyfab brands of knitted shadecloth, namely Parasol, PolyFX, Comshade, Comshade FR, Comshade Xtra, and Architec 400 are specifically designed to be used as shadecloth for human protection, and are guaranteed to be supplied free of defects.

‘Free of Defects’ means that the products meet their published descriptions and technical specifications, and are homogeneous in appearance after allowance for minor variance, such as tie knots or twisted yarn that do not affect physical properties, but are the unavoidable result of the knitting process. The specifications for all products, including overall weight per square metre, have a tolerance of ± 10% on published values, due to the variances inherent in production and scientific error in the methods of test.

The Nolan Group further warrants that the products will perform satisfactorily when used in its design context in the temperate climatic conditions experienced throughout Australia.

‘Satisfactorily’ means with continued but gradually diminished utility over its expected life, due to the unavoidable effects of Ultra-Violet Radiation and Weathering, such as colour variation, strength loss, and dimensional change. The measure of acceptable deterioration in this context is determined by Australian Standard AS 4174 – 2018 “Knitted and Woven Fabrics”, Section 3.3 “Resistance to degradation by light”. Extreme climatic conditions, particularly high temperature and humidity, may accelerate this inevitable product degradation.

‘Design Context’ means the products are fabricated and installed to the certified design and specification of a licensed Structural Engineer; or according to the Standard Details available on the website www.polyfab.com.au , certified for the particular location by Izzat Consulting Engineers; and the product is maintained under the required tension over its expected life, without excessive stretching or overloading during installation.

‘Expected Life’ is at least the period covered by warranty, provided the product is installed correctly, and cleaned and maintained as recommended. The warranty period for strength loss is TEN YEARS from the date of installation for Parasol; TWELVE YEARS for Polyfx, and Comshade; and FIFTEEN YEARS for Comshade Xtra and Architec 400.

The warranty period for colour change, in excess of that allowed under Australian Standard AS 4174-2018, is TWO YEARS for all products.

The warranty specifically excludes mechanical fatigue or damage due to wind load, and damage attributable to faulty design or installation, such as abrasion by sheathed cables, or tear caused by undue concentration of stress at supports; to storm or cyclone events, including hail loading; and to vandalism.

The Nolan Group’s liability under the warranty is limited to replacement of the material only; or its equivalent cost, both options with a discount on value for the time the fabric has been in place, on a pro-rata basis as follows:-

  • The first third of the warranty period Nil Discount
  • The second third of the warranty period 50% Discount
  • The final third of the warranty period 75% Discount

Liability for any consequential loss, including labour and installation, is expressly excluded.

In the event of a claim, proof of purchase must be provided. In the event of a dispute, the determination of the manufacturer or recognised industry association is the sole basis on which replacement or refund is made.

This limited warranty shall under no circumstances override legal guarantees that may be required under the Consumer Act. The warranty is not transferrable and applies only to the original purchaser.

Care and Maintenance Instructions

Heavy duty shade cloth is an industrial textile made from High Density Polyethylene (HDPE) yarn, which has ultraviolet stabilisers and colour pigments incorporated into the structure.

HDPE is resistant to most acids and alkalis, and fungal attack. It does not absorb water, which is a significant factor in resisting staining and inhibiting mildew growth. These characteristics make HDPE ideal as a base yarn for a lightweight, strong shadecloth. However, it has only a weak resistance to halogens, such as chlorine; and halogenated hydro-carbons. It is also affected by strong oxidising agents, such as hydrogen peroxide, chlorox (bleach) and some alcohols.

Using such chemicals for cleaning should be avoided. Dirt or mildew is usually the result of contaminants caught in the interstices of the cloth, and should be easily removed using a high pressure hose, which should be used judiciously, to avoid physical damage to the yarns and thread. For stubborn stains, scrub with a brush and a weak solution of household detergent.

Careful consideration should be given to the environment in which Polyfab shade cloth is used. For example, when suspended over a swimming pool, it will be exposed to chlorine emissions and its effective life may be reduced.

The shade sail should only be installed by a company or individual that has appropriate experience and accreditation from the Specialty Textiles Association, Lightweight Structures Association of Australia, or similar body; to the design and specification of a licensed civil engineer.

It is important that the shade sail remains under adequate tension to minimise the possibility of fatigue cracking due to wind-flap. Re-tensioning will be necessary if the shade sail becomes loose and sloppy.

Download the Care & Maintenance Flyer