Polyfab Australia

About Polyfab Australia

Polyfab is at the forefront of shadecloth development, in particular for sun shade sails. Our premium quality products are used throughout Australasia, the Middle East, USA and Europe. Based in Australia, Polyfab carries ongoing research and uses state of the art facilities. We manufacture and supply shade sails for commercial and domestic use since 1995 to national and international distributors.

Accessible shade for all

March 1st, 2017 / By:  / Article published and authorised for copy here by Fabric Architecture Mag

In the desert of Arizona, shade is always in high demand. Following the popularity of its signature SUNAMI® shade structure, Tensile Shade Products LLC of Tucson, Ariz., wanted to expand its prefabricated shade structure product line to include another product that would provide more shade with a similar style, and would be a dynamic enhancement to commercial, public and private environments. The company’s solution was OSPREY®, a larger variation of […]

850,000m2 of Comshade in one project!

850,000m2 of Comshade in one project!

Enough to cover nearly 40 Sydney Opera Houses…
Delivered on time, on budget and the end customer is very happy with Polyfab’s attention to quality control.

Introducing a world first in knitted shadecloth: Comshade Xtra®

Polyfab has created a game changer… A shadecloth with a maximum 99.7% UV block.
Comshade Xtra® significantly exceeds any other shadecloth on the market for UV protection and strength to weight ratios.
Ideal for medium and large sized, Comshade Xtra® has high tensile commercial projects where safety and longevity are critical.

Download the brochure by clicking here

US Tennis Open shaded by Polyfab USA

comshade tennis open USA polyfabIf you’re a tennis fan, and have been looking forward to the upcoming US Open (August 31 – September 13, 2015), you might check on their official website (www.usopen.org) and read:

“Fans coming to this year’s US Open will not have to look long or hard to discover what’s
new at the 2015 event. They need only look up. The superstructure for the roof over Arthur Ashe Stadium is
complete, with more than 6,000 tons of steel surrounding Arthur Ashe Stadium in a technological first:
constructing a stand-alone support system […]

New Sales flyers and digital sample cards

We have just released new printed flyers for all three fabric lines:

Polyfab flyers

These will soon be shipped to your local distributors, so check with them if you need any for handing out to your customers or for home & garden shows.

We also have these same pieces available in an electronic version—our “Digital Sample Card”. These have already been sent out to your distributor, and we have attached a copy of each of these to the email with this newsletter.

In addition, we are getting these pieces translated into Spanish, so will have them distributed […]

Polyfab USA is going to the dogs

polyfabYes, it’s official — Polyfab USA is going to the dogs…and cats…and rabbits… Specifically, our Comtex® Red and Aquamarine and Polyfab ProTM Shade Sail Hardware is being used for shade sails over several areas of the Rancho Coastal Humane Society (RCHS):

We were approached by Patrick Howe of Shazeebo, who has done several jobs already for this charitable organization. He asked if Polyfab would be willing to donate the fabric and hardware for this job, and Shazeebo would donate the labor.

PolyfabWe agreed, and a few weeks […]

Revised care & Maintenance instructions (Polyfab USA)

We have revised our Shadecloth Care & Maintenance Instructions. Previously we had recommended “mild dish soap”, but were advised that even some dish soaps can contain harsh chemicals that can be injurious to fabrics. So, we now advise the use of Polyfab ProTM Shade Sail Cleaner.

cleaning shade sail cleaning shade sail

850 000 m2 of Comshade in one project

850000m2Enough to cover nearly 40 Sydney Opera House!

Delivered on time, on budget, and the customer is very happy with Polyfab’s attention to quality control

Working with shadecloth just got a whole lot easier

Polyfab stentered heat-set fabricPolyfab’s stentered heat-set fabric removes curly fabrication problems. It lays flat so you can work flat out.

Why use Polyfab’s stenter treated fabric?

  • It lays very flat and won’t curl or roll up when being marked out, cut or sown.
  • Saves you time and money as you get the job done much faster
  • Less shrinkage, more stability
  • Maintains its strength and over 90% of it’s UV protection factors
  • Much easier to use

Try Polyfab’s stenter treated shadecloth – your staff will appreciate its ease of use while you’ll love the cost savings.

[…]

Improved Distribution System throughout Australia

Screen Shot 2014-11-10 at 1.25.02 amSee the Distributors page for the our up-to-date list of Distributors and their contact details.

Load More Posts